VGuard N series Manual de usuario descargar pdf (Pagina 21)

 Live Audio: When this is activated, and you had connected audio

input to the correspondence cameras, you are able to have live audio

monitoring when the sound is connect to a speaker.

 ALARM RECORD: When system not under recording mode, after

activated of this function, the system will start recording after alarm

triggered. Recording time is the time set between alarm intervals with

3-5seconds pre-alarm. Also input points can activate alarm records.

Recording time is the signal input time.

 VGA-PIP: PIP (Picture in Picture) functions us use to see both record

and playback images at once. When it is set at on (activate), press the

bottom, there will be a sub-window showing on the VGA

monitor. Then both recording and playback images can be see at the

same time. Press the bottom again then the sub-window will be

disappeared.

Note: PIP function can only support by VGA output connects to

VGA monitor. TV monitor does not support this function.

3.6 Network Setup

NETWORK SETUP : SERVER SETUP

1.HOST NAME VGN8C-----

2.CONNECT SERVER ON

3.SERVER 192.168.16.127

------------

4.SERVER PORT 40000

5.DISCONNECT ALM -- -- -- --

Network Setup is to setup the network connection function. You can

setup the system’s network connection and also you can setup 4 sets for

remote user’s name, password, authorization and camera.

You will require setting the “Connect Server” to off before setup/alter

Network Setup and Remote User.

 Server Setup:

When enter this setup, the above server setup pages will be shown.

 Host Name: Host name is used for recognition when connecting

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Sin comentarios

VGuard N series Manual de usuario Pagina 21